{"title":"Suspension Control Arm Bracket","description":"\u003ch2\u003eAbout Suspension Control Arm Bracket\u003c\/h2\u003e\n\u003cp\u003eSuspension Control Arm Bracket is a replacement item associated with the steering and suspension system. The component holds or positions a component in its intended location; fit depends on the attachment points and assembly design. Steering and suspension parts affect wheel control, ride behavior and alignment, so correct geometry and placement are essential.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Correct Suspension Control Arm Bracket\u003c\/h2\u003e\n\u003cp\u003eChoosing the correct suspension control arm bracket starts with your vehicle’s year, make, model and applicable equipment details. Verify the exact installation location and original equipment specifications. Compare attachment points, shape, orientation and hardware included. Bent, cracked or corroded mounting pieces should be checked during service. A manufacturer part number is often the most reliable way to distinguish similar-looking options.\u003c\/p\u003e\n\u003ch2\u003eInspection and Installation Considerations\u003c\/h2\u003e\n\u003cp\u003eInspect the original suspension control arm bracket and the mating holes, brackets and contact surfaces. Damaged mounting points, missing retainers or incorrect tightening can cause repeat problems. Confirm whether any hardware is single-use and follow the applicable service procedure.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs mounting hardware interchangeable between trims?\u003c\/h3\u003e\n\u003cp\u003eNot always. Mounting points and component geometry can change by vehicle model, trim or production configuration.\u003c\/p\u003e\n\u003ch3\u003eHow do I verify the right suspension control arm bracket for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompare manufacturer part numbers, fitment notes, installation position and the specifications shown on the individual product page. Similar names do not guarantee interchangeability.\u003c\/p\u003e","products":[{"product_id":"gmp-25918964","title":"25918964","description":"\u003cp\u003eGM Genuine Parts Suspension Control Arm Support Brackets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).\u003c\/p\u003e","brand":"GM GENUINE PARTS","offers":[{"title":"Default Title","offer_id":56022738894921,"sku":"25918964","price":121.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/25918964_primary.jpg?v=1792092076"},{"product_id":"dre-926-074","title":"926-074 — CONTROL ARM AXLE BRACKET","description":"\u003cp\u003eControl Arm Axle Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCost-effective - this front lower right control arm bracket allows the replacement of just the damaged bracket on specified Jeep SUVs, saving the expense of replacing the axle assembly\u003c\/li\u003e\n\u003cli\u003eSaves time - skip the trip to the salvage yard or the dealer; just weld this replacement bracket into place after proper preparation for an effective, labor-saving repair\u003c\/li\u003e\n\u003cli\u003eComplete solution - constructed from heavy gauge steel and includes alignment\/mounting bolt and eccentric washers for a seamless, secure fit and greater resistance to damage than the factory bracket\u003c\/li\u003e\n\u003cli\u003eDirect replacement - precision-engineered and manufactured to restore this critical pivot point for the control arm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen a control arm bracket on certain Jeep Wrangler, Cherokee and Grand Cherokee SUVs bends or fails from rust or impact, the usual repair options are either a trip to the salvage yard to hunt for a used bracket or an entire new axle assembly from the dealer. Our Dorman OE FIX solution offers a much more affordable repair alternative that allows the replacement of just the damaged bracket, restoring this critical pivot point for the control arm. The front lower right bracket is constructed from rugged heavy-gauge steel and is designed to be welded into place after the removal of the original equipment bracket and proper surface preparation. It comes complete with an alignment\/mounting bolt and eccentric washers for a seamless, secure fit and performance that is engineered for greater resistance to damage than the factory bracket.\u003c\/p\u003e","brand":"DORMAN OE SOLUTIONS","offers":[{"title":"Default Title","offer_id":56023300341833,"sku":"926-074","price":31.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/926-074-007.jpg?v=1792217789"},{"product_id":"dph-td346w","title":"TD346W — Suspension Control Arm Bracket","description":"\u003cp\u003eSuspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDelphi brackets undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications\u003c\/li\u003e\n\u003cli\u003eBrackets utilize robot welding for consistent performance and quality\u003c\/li\u003e\n\u003cli\u003eAnti Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics\u003c\/li\u003e\n\u003cli\u003eDelphi includes the necessary accessories for a complete job\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDelphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.\u003c\/p\u003e","brand":"DELPHI","offers":[{"title":"Default Title","offer_id":56025942523977,"sku":"TD346W","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/td346wa.jpg?v=1792066891"},{"product_id":"gmp-25918965","title":"25918965","description":"\u003cp\u003eGM Genuine Parts Suspension Control Arm Support Brackets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).\u003c\/p\u003e","brand":"GM GENUINE PARTS","offers":[{"title":"Default Title","offer_id":56029375070281,"sku":"25918965","price":121.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/25918965_primary.jpg?v=1792093111"},{"product_id":"dph-td345w","title":"TD345W — Suspension Control Arm Bracket","description":"\u003cp\u003eSuspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDelphi brackets undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications\u003c\/li\u003e\n\u003cli\u003eBrackets utilize robot welding for consistent performance and quality\u003c\/li\u003e\n\u003cli\u003eAnti Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics\u003c\/li\u003e\n\u003cli\u003eDelphi includes the necessary accessories for a complete job\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDelphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.\u003c\/p\u003e","brand":"DELPHI","offers":[{"title":"Default Title","offer_id":56034264285257,"sku":"TD345W","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/td345wa.jpg?v=1792062359"},{"product_id":"spe-67465","title":"67465 — Rear Camber Alignment Camber Bushing Kit","description":"\u003cp\u003eCIVIC REAR CAMBER ADJ\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCreates adjustability with replacement control arm mount\u003c\/li\u003e\n\u003cli\u003eSuperior corrosion resistant finish\u003c\/li\u003e\n\u003cli\u003eRubber bonded replacement bushing\u003c\/li\u003e\n\u003cli\u003eRequires one kit per wheel\u003c\/li\u003e\n\u003cli\u003eAdjusts camber plus or minus 1.25 degrees\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis rear bracket and bushing replace the stock mount on 06 and up Honda Civics. By rotating the eccentric bolt\/cam assembly in the bracket you can get +\/-1.25 degrees of rear camber change. Use #75980 bushing removal press sleeve set with the #72509 ball joint press to remove the old bushing and to press in the new bushing.\u003c\/p\u003e","brand":"SPECIALTY PRODUCTS","offers":[{"title":"Default Title","offer_id":56035004940361,"sku":"67465","price":71.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/67465.jpg?v=1792058307"},{"product_id":"ran-rs62118b","title":"RS62118B — Suspension Control Arm Bracket","description":"\u003cp\u003eRockGEAR Suspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCOMPATIBILITY -- Fits 2-door, 4-door Jeep Wrangler JL, non-Rubicon and Rubicon models with 2-in. to 4.5-in. lift kits that utilize the factory upper and lower control arms\u003c\/li\u003e\n\u003cli\u003eMAINTAINS CASTER ANGLE -- Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JL models\u003c\/li\u003e\n\u003cli\u003eEASY TO INSTALL -- Bolt-on system for easy installation features three fixed adjustment locations for each height with option for additional caster\u003c\/li\u003e\n\u003cli\u003eRESISTS CORROSION -- Durable black E-coat finish resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eENGINEERED TO LAST -- Made of high-strength, low-alloy steel for long life and dependability\u003c\/li\u003e\n\u003cli\u003eONE-PIECE SOLUTION -- One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction\u003c\/li\u003e\n\u003cli\u003eBUY WITH CONFIDENCE -- Comes with Rancho's limited one-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned to keep the control arms of your Jeep Wrangler JL or Gladiator JT at factory angles, Rancho control arm geometry correction brackets help deflect road harshness, reduce brake dive and allow for proper caster angle after the addition of an aftermarket lift kit. The one-piece welded design features three fixed adjustment locations for each height with option for additional caster.\u003c\/p\u003e","brand":"RANCHO","offers":[{"title":"Default Title","offer_id":56035873554505,"sku":"RS62118B","price":188.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/rs62118b.jpg?v=1792094999"},{"product_id":"mev-cms501183","title":"CMS501183 — Suspension Control Arm Bracket","description":"\u003cp\u003eSuspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrosion resistant surface treatment prevents the build up of rust for longer service life.\u003c\/li\u003e\n\u003cli\u003eAdded LaborSaver Feature: Save time and money with bundled hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MEVOTECH","offers":[{"title":"Default Title","offer_id":56036348002377,"sku":"CMS501183","price":65.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/ms501183_fro.jpg?v=1792097326"},{"product_id":"mev-cms501182","title":"CMS501182 — Suspension Control Arm Bracket","description":"\u003cp\u003eSuspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrosion resistant surface treatment prevents the build up of rust for longer service life.\u003c\/li\u003e\n\u003cli\u003eAdded LaborSaver Feature: Save time and money with bundled hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MEVOTECH","offers":[{"title":"Default Title","offer_id":56036353441865,"sku":"CMS501182","price":65.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/ms501182_fro.jpg?v=1792076763"},{"product_id":"ran-rs62103","title":"RS62103 — Suspension Control Arm Bracket","description":"\u003cp\u003eRockGEAR Suspension Control Arm Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCOMPATIBILITY -- Fits Jeep Wrangler JK Unlimited and Rubicon models with 2-in. to 4-in. lift kits that utilize the factory upper and lower control arms\u003c\/li\u003e\n\u003cli\u003eMAINTAINS CASTER ANGLE -- Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JK models\u003c\/li\u003e\n\u003cli\u003eEASY TO INSTALL -- Bolt-on system for easy installation features four fixed adjustment locations for each height with option for additional caster\u003c\/li\u003e\n\u003cli\u003eRESISTS CORROSION -- Durable black E-coat finish resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eENGINEERED TO LAST -- Made of high-strength, low-alloy steel for long life and dependability\u003c\/li\u003e\n\u003cli\u003eONE-PIECE SOLUTION -- One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction\u003c\/li\u003e\n\u003cli\u003eBUY WITH CONFIDENCE -- Comes with Rancho's limited one-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned to keep the control arms of your Jeep Wrangler JK at factory angles, Rancho control arm geometry correction brackets help deflect road harshness, reduce brake dive and allow for proper caster angle after the addition of an aftermarket lift kit. Compatible with Jeep JK’s outfitted with 2-in. to 4-in. lift kits, the one-piece welded design bolts directly to the factory locations with no assembly required.\u003c\/p\u003e","brand":"RANCHO","offers":[{"title":"Default Title","offer_id":56036751540297,"sku":"RS62103","price":179.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/rs62103.jpg?v=1792058477"},{"product_id":"gmp-19181783","title":"19181783","description":"\u003cp\u003eFront Passenger Side Upper Control Arm Bracket\u003c\/p\u003e","brand":"GM GENUINE PARTS","offers":[{"title":"Default Title","offer_id":56041199697993,"sku":"19181783","price":100.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/19181783_primary.jpg?v=1792088751"},{"product_id":"dre-926-375","title":"926-375 — CONTROL ARM AXLE BRACKET","description":"\u003cp\u003eControl Arm Axle Bracket\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCost-effective - this front lower left control arm bracket allows the replacement of just the damaged bracket on specified Jeep SUVs, saving the expense of replacing the axle assembly\u003c\/li\u003e\n\u003cli\u003eSaves time - skip the trip to the salvage yard or the dealer; just weld this replacement bracket into place after proper preparation for an effective, labor-saving repair\u003c\/li\u003e\n\u003cli\u003eComplete solution - constructed from heavy gauge steel and includes alignment\/mounting bolt and eccentric washers for a seamless, secure fit and greater resistance to damage than the factory bracket\u003c\/li\u003e\n\u003cli\u003eDirect replacement - precision-engineered and manufactured to restore this critical pivot point for the control arm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen a control arm bracket on certain Jeep Wrangler, Cherokee and Grand Cherokee SUVs bends or fails from rust or impact, the usual repair options are either a trip to the salvage yard to hunt for a used bracket or an entire new axle assembly from the dealer. Our Dorman OE FIX solution offers a much more affordable repair alternative that allows the replacement of just the damaged bracket, restoring this critical pivot point for the control arm. The front lower left bracket is constructed from rugged heavy-gauge steel and is designed to be welded into place after the removal of the original equipment bracket and proper surface preparation. It comes complete with an alignment\/mounting bolt and eccentric washers for a seamless, secure fit and performance that is engineered for greater resistance to damage than the factory bracket.\u003c\/p\u003e","brand":"DORMAN OE SOLUTIONS","offers":[{"title":"Default Title","offer_id":56041632464969,"sku":"926-375","price":31.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/926-375-007.jpg?v=1792217801"},{"product_id":"gmp-11508301","title":"11508301","description":"\u003cp\u003eMulti-Purpose Bolt\u003c\/p\u003e","brand":"GM GENUINE PARTS","offers":[{"title":"Default Title","offer_id":56042206068809,"sku":"11508301","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/4670\/2921\/files\/11508301_primary.jpg?v=1792065873"}],"url":"https:\/\/teamvehicle.com\/collections\/part-types-suspension-control-arm-bracket.oembed","provider":"Team Vehicle","version":"1.0","type":"link"}